Tagged: dual watch

TYT TH-UV3R Review Part 2

As I recently purchased a new PC I decided to program the TYT TH-UV3R using that – a departure from my Windows XP comfort zone as the new one is a Windows 8 machine. I had heard that the USB prolific serial drivers either didn’t work, wouldn’t work or required a load of hassle to get working so I was a bit perturbed. In the end it was all unfounded (for me anyway). I plugged in the USB prolific serial cable and waited. As Windows 8 didn’t install anything I checked device manager (under control panel) to see what was going on. Com 3 was showing up with an error so I downloaded the prolific serial drivers (Windows 7 as there are no dedicated Windows 8 drivers) and pointed the update driver command to the relevant file, whereupon installation took place. Within a few seconds the error had gone and communication had been established. Result!

No problems setting up a COM port on Windows 8
No problems setting up a COM port on Windows 8

Continue reading

TYT TH-UV3R Review Part 1

The TYT TH-UV3R is a compact and well built FM transceiver
The TYT TH-UV3R is a compact and well built FM transceiver

The TYT TH-UV3R is a really compact 128 channel pocket sized radio. But don’t be fooled by its size this little radio packs a punch and is brimming with functionality.

By default the TH-UV3R is a dual band (136-174/400-470 MHz) radio, however by using the official TYT programming software full tri-band operation can be opened up (200-260 MHz) plus a decent extension to the UHF upper limit (470-520 MHz). The EU version doesn’t support 2.5kHz spacing, however the US version does. That said, its not always obvious what you’ll get so double check with the vendor prior to purchase to ensure you get what you need.

Continue reading

TYT TH-UV3R Preview

TYT TH-UV3R Camouflage model
TYT TH-UV3R Camouflage model

Just received a pair of TYT TH-UV3R’s from 409Shop. Although the TYT shares the “UV3R” designation with the BaoFeng UV3R, they are actually totally different radios.

The TH-UV3R is an ultra compact VHF/UHF FM transceiver and generally sold as a dual bander (136-174/400-470MHz), however this model is actually a tri-band radio and can be unlocked with the official TYT programming software (available from the downloads section at tyt888.com) to enable 200-260MHz and also extend the UHF range from 470-520MHz.

Power output is a modest 2W on high (touted as 2.5W but we’ll go with the former) and 0.8W low. Features include dual watch, FM radio with presets, scan, VOX, tone scanning, alpha tags amongst others (surprisingly no LED flashlight – now there is a first!). The two things that really attracted me to this model is the scrambler function and price – a real bargain at under $55 direct from Hong Kong.

Available in black, red, green or camo (I chose the latter to be a little different!).

This is a straightforward radio to use and while it has its quirks (and what Chinese radio doesn’t?), so far I’m thoroughly enjoying them.

Full review here…

WouXun KG-UV6D-E-V3 66-88/136-174 MHz Part 2

Size comparison with a BaoFeng UV-5R (right)
Size comparison with a BaoFeng UV-5R (right)

The WouXun KG-UV6D fits nicely in the hand though it is a bit bigger than say a BaoFeng UV-5R – not in height – more in girth. Its quite a chunky device weighing in at 253g and measuring up at 65x119x 39.5mm. It feels solid and well built – just like a commercial radio should.

Similarly sized the WouXun wins in the girth department!
Similarly sized the WouXun wins in the girth department!

Unlike a lot of Chinese handheld transceivers, virtually all operations can be entered/adjusted via the inbuilt menu system including naming channels which is useful in the field. Sidekey ANI functions have to be accomplished via a PC as do personal welcome messages (which include a battery voltage option or 6 character message), add to scan and priority channel monitoring. The user manual clearly states which functionality requires PC or menu entry which is useful.

When it comes to software there are quite a few options. WouXun’s official programming software, CHIRP and KGUV6 Commander written by radio amateur Jim Mitchell, KC8UNJ.

Continue reading

WouXun KG-UV6D-E-V3 66-88/136-174 MHz Review Part 1

WouXun KG-UV6D-E-V3
WouXun KG-UV6D-E-V3

Right now the Chinese are pumping out two-way radios like never before. And as regular readers will know I picked up two BaoFeng UV-5R’s recently. So impressed by these little handies it wasn’t long before I started short listing my next bit of kit. There is a bewildering choice and manufacturers seem to magically appear on a daily basis! Unfamiliar and exotic sounding names such as Huitong, Puxing, Quansheng, TYT, and Waccom (to name just a few) have all joined the battle for Western cash.

Many are simply rebadged models utilising the same internals and software, but a few really stand out from the crowd. One such example is WouXun (pronounced Wo-Shone as far as I can tell). Reputation is everything and I think its safe to say WouXun is widely accepted as the name to look for when purchasing a Chinese built transceiver.

I don’t just write reviews – I also read them. So I checked out the internet for some background information. It didn’t take long to see that the radio amateur community held WouXun in high regard. Sure there is always a bit of negative press about some aspect, but overall its was positive.

So WouXun it was.

Continue reading