The WouXun KG-UV6D fits nicely in the hand though it is a bit bigger than say a BaoFeng UV-5R – not in height – more in girth. Its quite a chunky device weighing in at 253g and measuring up at 65x119x 39.5mm. It feels solid and well built – just like a commercial radio should.
Unlike a lot of Chinese handheld transceivers, virtually all operations can be entered/adjusted via the inbuilt menu system including naming channels which is useful in the field. Sidekey ANI functions have to be accomplished via a PC as do personal welcome messages (which include a battery voltage option or 6 character message), add to scan and priority channel monitoring. The user manual clearly states which functionality requires PC or menu entry which is useful.
When it comes to software there are quite a few options. WouXun’s official programming software, CHIRP and KGUV6 Commander written by radio amateur Jim Mitchell, KC8UNJ.
Right now the Chinese are pumping out two-way radios like never before. And as regular readers will know I picked up two BaoFeng UV-5R’s recently. So impressed by these little handies it wasn’t long before I started short listing my next bit of kit. There is a bewildering choice and manufacturers seem to magically appear on a daily basis! Unfamiliar and exotic sounding names such as Huitong, Puxing, Quansheng, TYT, and Waccom (to name just a few) have all joined the battle for Western cash.
Many are simply rebadged models utilising the same internals and software, but a few really stand out from the crowd. One such example is WouXun (pronounced Wo-Shone as far as I can tell). Reputation is everything and I think its safe to say WouXun is widely accepted as the name to look for when purchasing a Chinese built transceiver.
I don’t just write reviews – I also read them. So I checked out the internet for some background information. It didn’t take long to see that the radio amateur community held WouXun in high regard. Sure there is always a bit of negative press about some aspect, but overall its was positive.
The Chinese manufactured BaoFeng (pronounced BowFung) UV-5R series FM transceiver has become a bit of a sensation since it was first released back in 2012. Originally conceived as a run of the mill commercial two-way radio, resultant internet exposure has seen it become one of the most talked about radios, primarily due to its feature set and price point.
Looking through the specification of the latest firmware release BFB297, its no wonder why. Wide/Narrow FM, full transmit and receive functionality (semi-duplex, plus multiple CTCSS/DCS tone options including cross) across two bands 136-174.0000 (VHF) and 400-520.9975 (UHF) means its suitable for a wide range of applications including the ever popular 2m and 70cm radio amateur bands. There is even a broadcast WFM radio (65-108MHz) with station scan functionality (press SCAN while in WFM radio mode to jump instantly to local stations).
Incidentally, firmware Ver. BFB297 is a bit of a misnomer as while that is what is displayed on the unit when “3” is pressed and held during start-up, the actual firmware could be higher as BaoFeng seem to have stopped updating the firmware readout – both my models are actually BFB307 (this was gleaned thanks to the latest version of CHIRP, Other Settings menu option).
I suppose at this juncture I should pull out the review disclaimer! Of course, users are required to hold a valid licence to transmit on any, or all, of the above radio spectrum and checks should also be made to ascertain the certification of this model against usage on certain bands/frequencies even if a valid licence is held. Regulations vary from country to country so make sure you are operating legally!
That said, if you plan to use it for receive (RX) only, then no licence is required and it is 100% legal. Talking of which, transmit (TX) can be disabled on any or all memory channels using CHIRP software (more on that in Part 2). I highly recommend downloading CHIRP as it offers a lot more functionality than BaoFeng’s original VIP software does.